Tub Skirt


On the other side of the bathroom the tub needed a skirt to finish it off and hide some of the plumbing.  This took some head scratching to figure out how to make it.

I made a curved form (below) and laminated two pieces of bending plywood, fir veneer on the front,  birch veneer on the back side and placed them in my vacuum press.  I modified some of the original aluminum trim to finish off the top and bottom of the panel.

Also on this side of the trailer is a divider that separates the tub from the bedroom mounted in the original aluminum track.  It is white laminate that fits tight to the tub on that side and VGF (vertical grain fir) on the bedroom side.  On the lower left corner I made a cutout for running wires around the back of the tub.

Leave a Reply