I’ve taken the tub out to do a small repair to the floor and decided, since it was coming out anyway and I am adding a grey tank under the floor in the trailer frame, I would be able to lower the tub down 2 inches giving this 6 footer some much needed headroom. The picture above shows the difference in height from the old support and the new ones.
This is a repair supported by sticks that are double stick taped to the top side. The bottom side will get a several layers of fiberglass.
This is the bottom side after the fiberglass repair.
Next I built a form and fiberglassed another modification. When I pull the form off it will be easier to see what I’m doing. Hope it turns out OK. This is my first foray into fiberglass work.
Leave a Reply